Artificial Grass Turf Putting Green Lawns Backyard Golf Course Field
Artificial Grass Turf Putting Green Lawns Backyard Golf Course Field
Product Details

Artificial Grass Turf putting green Lawns Backyard Golf Course Field

1. Brief introduction of artifical turf

Noya Artificial Grass, the yarn type is PE or PP monofilament fiber. It is easy mantenance, no irrigating and no fertilizing. Safe and eco-friendly, harmless to the soil or the underground water. We make it decorate the Balcony, Golf course, Football course and so on. The size for Artificial Turf is customised, the same to the colors.

2. Specifications of artificial backyard putting green

Yarn type: PE or PP monofilament fiber

Dtex: About 12,000D

Pile height: 10--40mm

Stitch rate: 16/100m--28/100mm,35/100mm

Gauge: 3/8 inches, 3/4 inches

Colors: olive green, Verde green, white, or customized

Backing: multi-layers

Coating: SBR latex

Application: landscaping, sport court, balcony, special purpose for Golf Course and so on.

3. Installation of artificial football turf

First step: Based on the basketball court to identify the location of all the white line and later snap the ink and carpenter's sink marker.

Second step: indicate the location of white line’s position on the midfield with marking chalk.

Third step: identify the central point and draw the midfield circularity.

Forth step: draw the midfield circularity with marking chalk.

Fifth step: lawns get into court.

Sixth step: roll out the lawns by the production planning number in order.

Seventh step: make flat the lawns.

Eighth step: cut the redundant lawns in surroundings.

Ninth step: spread glue on foundation and surrounding lawns, after air-dry clapped them together.

Tenth step: joint and cut the redundant lawns between rolls.

11th step: diagram after joint and gluing.

12th step: cut the white lawns according to the standard field line.

13th step: glue the white cut lawns, dry up and use them.

14th step: cut the green lawn on the midfield circularity and enchase the white lawns.

15th step: enchase the white lawns.

16th step: glue the joint between the white and green lawns (width is 15cm-20cm), clapped them together after air-dry.

17th step: glue on the foundation on the edge of penalty area and the lawns, clapped them together after air-dry.

18th step: clean the ground after installation.

19th step: arrange the sand in order

20th step: infill the sand into ground equably.

4. Patterns pictures of artifical lawns for reference

artificial field turf

artificial football turf

artifical turf

 artificial football turf