Faux Brick Wall Panels

Faux Brick Wall Panels

Test the steps of the Faux Brick Wall Panels

1, check whether the Faux Brick Wall Panels cracks.

2, whether the Faux Brick Wall Panels, cracks through the entire wall and wear to the back, whether there is sloping cracks.

3, whether the Faux Brick Wall Panels and in different floors of the same location in the wall there are directions, there are regular cracks.

4, check whether the Faux Brick Wall Panels (floor and roof) wear cracks, cracks in the current design specifications to allow the scope of (0.3mm) within the general defects, does not affect the carrying capacity of cast-in-place board. But the fracture has a detrimental effect on the durability of the structure.

5, check the Faux Brick Wall Panels (floor and roof) whether there is force cracks, this situation generally appears in the bearing at the board, or plate in the middle of the bottom plate. Such fractures are generally expressed as 45 ° cracks with the corner, perpendicular to the cracks with the beam, the cracks are often not to wear, the shape of the width of the narrow. It should be said that such cracks tend to have an impact on structural safety and durability and need to be taken seriously.

Faux Brick Wall Panels.jpgFaux Brick Wall Panels.jpg